Motorola ATCA-717 - Manual (Page 88)

BIOS Selecting The Boot Device
88 PENT/ATCA−717
Selecting The Boot Device
There are two possibilities to determine the device from which BIOS attempts to boot:
S Via setup to select a permanent order of boot devices
S Via boot selection menu to select any device for the next boot−up procedure only
Via Setup
1. In the menu line, select [Boot]
A menu similar to the one shown in the following figure appears. Note that the layout
may vary slightly with new BIOS versions.
a
2. Select [Boot Device Priority]
A menu similar to the one shown in the following figure appears. Note that the layout
may vary slightly with new BIOS versions.
a