Motorola ATCA-717 - Manual (Page 49)

On−Board Hardware Accessories Installation
PENT/ATCA−717 49
Hard Disk
The blade allows to install one 2.5" hard disk which may be connected to either an
on−board parallel or serial Advanced Technology Attachment (ATA) interface connector.
The hard disk can be mounted directly on the blade without the need for an additional
wire.
aaa
Figure 5: Location of On−Board Hard Disk
The serial ATA interface supports up to 150 MByte/s data transfer rate and the parallel
ATA supports all PIO and DMA modes up to Ultra ATA100. Hard disks which are
connected to the parallel ATA interface act as master.
a
Two hard disk accessory kits are available for the blade. One is called
ACC/ATCA−715/HDD and contains a parallel ATA hard disk drive. The second is called
ACC/ATCA−715/HDD−SATA and contains a serial ATA hard disk drive.
a
Installing a Hard Disk