Motorola ATCA-717 - Manual (Page 62)

Controls, Indicators, and Connectors Face Plate
62 PENT/ATCA−717
P
M
C
3
R
E
S
E
T
Reset
Key
Figure 9: Location of Reset Key
On pressing it, a hard reset is triggered and all attached on−board devices are reset.
Note: a The IPMC is not reset via this key.
a
Connectors
The blade provides two mini USB 2.0 connectors of type AB at its face plate. They
correspond to the USB interfaces 1 and 2. An adapter cable accessory kit called
ACC/CABLE/USB is available for the blade. It converts the mini USB male face plate
connectors to USB female connectors.
aaa