Cable accessory kits, Acc/cable/pmc/rj−45, Acc/cable/rj45/dsub – Motorola ATCA-717 User Manual
Page 57: Acc/cable/usb
Cable Accessory Kits
Installation
PENT/ATCA−717
57
Cable Accessory Kits
At the time of writing this manual the following cable accessory kits are available:
aa
S ACC/CABLE/PMC/RJ−45
S ACC/CABLE/RJ45/DSUB
S ACC/CABLE/USB
Note:
a
Check with your local Motorola representative for the availability of further
accessory kits.
a
ACC/CABLE/PMC/RJ−45
The ACC/CABLE/PMC/RJ45 is an accessory kit compiled for the ACC/ARTM−717 rear
transition module. It contains a splitter cable which allows to access the serial interfaces of
PPMC−280 modules installed on the front blade via the ARTM−717 face plate.
ACC/CABLE/RJ45/DSUB
The ACC/CABLE/RJ45/DSUB/5E is an accessory kit containing a shielded cable of 2m
length and an RJ−45/DSUB adapter plug. The cable provides Null−modem functionality
which enables you to connect a laptop to the serial interface of the blade. The cable can be
connected to either an installed CMC module or RTM.
ACC/CABLE/USB
The ACC/CABLE/USB/5E is an USB adapter cable of 200 mm length which converts the
mini USB face plate connectors to USB A female.