Marantz RC1200 - Manual (Page 10)

ENGLISH
MEMO CLEAR GUIDE MUTE
1 2 3 4 5
C D DV D CD-R/MD
DSS T V VCR
AMP L D TUNER TAPE
AUX
AUTO DOLBY THX DTS HALL
MATRIX MOVIE 2CH OSD SLEEP
C D
L D
BASIC OPERATION
USE MODE
The remote controller will normally be used in
the USE mode.
It comes preset with codes commonly used to
control 11 types of components manufactured
by Marantz, Philips and RCA (for DSS),
including DSS, DVD, TV, LD, VCR, AUX,
TUNER, CD, TAPE, CD-R/MD, and AMP, as
well as many others that utilize the RC-5
remote control language.
1. Press once one of the Function buttons
, to change to another component’s
commands, such as LD button.
2. LD will be displayed on the LCD and the
function codes will be set to operate the
laser disc player, and if you double
clicked the LD function button, the
amplifier or receiver’s input will be
changed as well.
3. Now you can operate the laser disc player.
When a button is pressed, the
symbol
indicates that a remote code is being
transmitted.
is not displayed if a button
for which no code has been set is pressed.
4. The Jog Dial m is used to select any one
of up to 10 direct operations that can be
performed for each of the 11 functions
including LD, TV and AMP. Rotate the
Jog Dial m to select one of these
commands. The number of the current
page is indicated by
- at LCD
C.
The signal is sent when the ENT button n
is pressed.
Page numbers cycle up or down, for
example
→ → → →
etc. or
→ → → →
etc. depending on
which way the Jog Dial m is rotated.
The last page position for any given
command function is retained in the
memory even if the remote controller is
switched to the command function for
another component. (Last Memory)