Marantz RC1200 - Manual (Page 15)

ENGLISH
MEMO CLEAR GUIDE MUTE
1 2 3 4 5
C D DVD CD-R/MD
DSS T V VCR
AMP L D TUNER TAPE
AUX
AUTO DOLBY THX DTS HALL
C D
L D
• If you do not wish to rewrite the name,
simply press the OK Cursor button ⁄0.
• If you wish to rewrite the name, input the
desired characters using the ten-key
pad ⁄7. The part of the display which is
to be overwritten can be moved using
the left (
< ) and right ( > ) Cursor buttons
⁄0. When you are finished rewriting,
press the
OK Cursor button ⁄0.
To simply erase already existing
characters, press the 0 button to
replace them with a blank space.
(Refer to next section on rewriting
names)
6. Use the same procedure to program the
codes for other 1-6 with the
Jog Dial m.
7. When finished programming the codes
for each of the buttons, use a ballpoint
pen or other sharp point to press the
MODE button z to return the remote
controller to the USE mode. The LCD
displays
USE indicator, and the newly
programmed codes now can be used.
REWRITING NAMES
This remote controller allows the names
accessible by
Jog Dial m to be rewritten with
new ones of your choosing.
• Rewriting of names is performed for each
individual function.
• Let’s use a laser disc player as an example
to show how to change the ’s “SIDE-A” to
“LD-A”.
1. Use a ballpoint pen or other sharp point to
press the
MODE button z to switch the
remote controller to the NAME mode. The
NAME indicator blinks.
2. Press the LD Function button ,.
The left-hand edge of the function name
now blinks.
3. Use the Jog Dial m to select the page for
which you wish to enter a new name.
Press the down (
v ) Cursor button ⁄0, and
move the blinking location to the Jog Dial.