English – Marantz RC1200 User Manual
Page 31
ENGLISH
ON
OFF
ON / OFF
SOURCE
MACRO
MODE
LEARNING REMOTE
CONTROL RC
1200
POWER
CH
VOL
OK
OK
3.
Use a ballpoint pen or other sharp point to
press the
MODE
button z on the
receiving unit to call up the
CLONE
and
RX
displays.
CLONE
appears at LCD
A
and
RX
at LCD
B.
4.
Press the
OK
Cursor button ⁄0 on the receiving
unit.
5.
Press the
OK
Cursor button ⁄0 on the sending
unit. The copying operation is now
commenced.
6.
During the copying operation, the bar
displays at LCD
C on both units start
moving from left to right. After the entire
bar displays have lighted, the display at
LCD
B on the receiving unit changes to
RX OK
and the LCD display on the
sending unit changes to
TX OK
. Copying
is now completed.
• Do not touch either of the remote
c o n t r o l l e r s d u r i n g t h e c o p y i n g
operation. Doing so may cause
copying to fail.
• When copying has failed at an interim
point,
RX NG
will appear on the LCD
display of the receiving unit. Check
steps 1 to 5, and repeat.