Marantz RC1200 User Manual
Page 38
ENGLISH
The Setup mode includes the following
items, which may be accessed using the
^ and
v
Cursor buttons ⁄0.
• Switch destination (version) (VER)
• A d j u s t t i m e i n t e r v a l b e t w e e n
transmissions of macro operations
(MACRO)
• LCD lighting duration adjustment
(LIGHT)
VER: Switches the type of preset codes
contained in the remote controller .
LCD
A displays
VER
, while LCD
B displays
either
USA
or
REST
.
USA
means that the
CD-
R/MD Function
button , is set to CD-R.
REST
means that the
CD-R/MD Function
button , is set to MD.
Use the
<
and
>
Cursor buttons ⁄0 to select the
desired version, then press the
OK
Cursor
button ⁄0. This will finish the operation and
return the LCD to its original state.
• To cancel the setting, press any button
other than the Cursor buttons ⁄0.
• To continue the setting, press the
v
Cursor
button ⁄0.
Note:
Codes that have been programmed will not
be erased even if the VER setting is
changed, however the
NAME
indicator
displays associated with the Jog Dial
command will be changed. Also, the Jog
Dial commands for CD-R/MD functions that
are contained within macros will also
change.