Marantz RC1200 - Manual (Page 18)

ENGLISH
MEMO CLEAR GUIDE MUTE
CH VOL
OK
1 2 3 4 5
C D DVD CD-R/MD
DSS T V VCR
AMP L D TUNER TAPE
AUX
AUTO DOLBY THX DTS HALL
C D
CLEAR
OK
w
q
ON OFF ON / OFF
SOURCE
MACRO MODE
LEARNING REMOTE
CONTROL RC 1200
POWER
2. Erasing by Button(s)
T o c l e a r t h e c o d e s a n d n a m e s
programmed in any of the buttons
• Press the button concerned twice while
holding down the CLEAR button ⁄5.
When the codes are cleared, the
button returns to its factory presets or
it is left empty.
Jog Dial codes can be cleared in the
same way: turn the Jog Dial to call up
the name of the command whose
codes are to be erased, and press the
ENT button n (either the left one or
the right one) twice while holding
down the
CLEAR button ⁄5, and the
c o d e s a n d c o m m a n d n a m e s
memorized in the button will be
cleared.
When the codes are cleared, the
button returns to its factory presets or
it is left empty.
• To erase codes programmed for the
CLEAR button ⁄5, simply press the
CLEAR button ⁄5 continuously for 3
seconds.
As an example, let’s clear the PLAY
command from the laser disc player
command set.
1. While holding down the CLEAR button ⁄5:
2. Press the OK Cursor button ⁄0 twice.