Programming the jog dial – Marantz RC1200 User Manual
Page 14
ENGLISH
PROGRAMMING THE JOG DIAL
Let’s use the example of setting
as the
SIDE-B code for the laser disc player.
1.
Use a ballpoint pen or other sharp point to
press the
MODE
button z until the
LEARN
indicator is displayed and starts
to blink.
2.
Place the laser disc’s remote controller so
that its infrared transmitter window is
facing the infrared signal receiver window
on the Marantz remote controller at a
distance of about 5 centimeters (2
inches).
3.
Press the
LD Function
button ,.
4.
Rotate the
Jog Dial
m left or right until
is displayed, then press and release the
ENT
button n.
• The
LEARN
and
NAME
indicators will
both be displayed.
5.
Press the
SIDE-B
button on the laser
disc’s remote controller continuously until
OK
is displayed on the Marantz remote
controller’s LCD, indicating that the
programming has been completed.
• If
AGAIN
appears on the LCD, some
error has prevented the command from
being learned. If this happens, simply
repeat the procedure from step 3.
When the programming has been
completed, the remote controller
automatically switches to the NAME
mode.
The left hand position on the LCD
B
blinks, indicating the character in the
name to be rewritten.