Marantz RC1200 - Manual (Page 27)

ENGLISH
ON OFF ON / OFF
SOURCE
MACRO MODE
LEARNING REMOTE
CONTROL RC 1200
POWER
MEMO CLEAR GUIDE MUTE
C D DVD CD-R/MD
DSS T V VCR
AMP L D TUNER TAPE
AUX
AUTO DOLBY THX DTS HALL
C D
L D
When you are finished programming the
macro, use a ballpoint pen or other sharp
point to press the
MACRO button x.
Now, execute the macro you just programmed.
1. Press the CD Function button , for 3
seconds.
2. The macro commands are transmitted to
the components in order, and the names
of the operations being performed are
displayed on the LCD in order.
Example 2
Turn the main amplifier ON
→
Change the
amplifier’s input source to LD
→
Set the
Surround mode to DOLBY
→
Switch the TV to
video input
→
Set the laser disc player to
PLAY
1. Use a ballpoint pen or other sharp point to
press the
MACRO button x.
2. Press the LD Function button ,.
• Here the LD Function button , is
used as the macro button, but any
function button can in fact be used.
CH VOL
OK
C D DVD CD-R/MD
DSS T V VCR
AMP L D TUNER TAPE
AUX
C D