Marantz RC1200 - Manual (Page 39)

ENGLISH
MACRO: Adjusts the time interval between
transmissions of macro operations
When the v Cursor button ⁄0 is pressed, LCD
a displays
MACRO , while LCD
b displays
STEP .
One square (
7) in LCD c is equivalent to an
interval of 0.5 seconds, allowing intervals of up
to 5 seconds to be set. The remote controller is
set at the factory with an interval of 1 second,
as indicated by (
77&&&&&&&&). Adjust the
interval between transmission of operation
codes using the
< and > Cursor buttons ⁄0,
then press the OK Cursor button ⁄0.
• To cancel the setting, press any button
other than the Cursor button ⁄0.
LIGHT: Adjusts the LCD display lighting
duration.
When the ^ or v Cursor button ⁄0 is pressed,
TIME appears at LCD
B. Every 7 at LCD C
represents a second, and a lighting duration
of up to 10 seconds can be set.
The unit is set at the factory with a duration of 5
seconds (
77777&&&&&). When 0 is set, only
the LIGHTING button ⁄9 can be used to light
up the LCD display: no other buttons can be
used to perform this operation.
Press the
< Cursor button ⁄0 to decrease the
lighting duration; conversely, press the >
button to increase it.
• After setting the duration, press the OK
Cursor button ⁄0.
• To cancel the setting, press any button
except the Cursor button ⁄0.
• To continue with the setting, press the ^ or v
Cursor button ⁄0.