Marantz RC1200 - Manual (Page 4)

ENGLISH
NAMES OF PARTS & FUNCTIONS
Names of Buttons & Functions
z
MODE button
Used to change the operation mode of the
remote controller. Pressing this button cycles
the remote controller through
USE
→
LEARN
→
NAME
→
CLONE TX
→
CLONE RX
→
USE , with the currently selected mode
displayed on the LCD.
x
MACRO button
Used to store a string of consecutive button
operations in the memory and also to revise
them.
Pressing it switches the remote controller in
and out of the MACRO mode. Its status is
displayed on the LCD.
c
Power ON and OFF
buttons
Used to turn ON and OFF the power of the
amplifier or receiver or turn ON and OFF the
power of a source component which has its
own ON and OFF buttons.
v
Source ON/OFF button
Used to turn specific sources (such as DVD
players, etc.) ON and OFF independently from
the rest of the system.
b
LCD
Used to display information about currently
selected modes and functions.
n
ENT buttons
Used to execute a function selected with the
Jog Dial m.
There are 2 ENT buttons, one on each side, so
that the remote controller can be used just as
easily with either hand.
The characters on the display can also be
programmed.
m
Jog Dial
Used to select the operation content for each
source. Ten types of direct operation are
possible for each of the 11 functions including
LD, TV, AMP, etc. After selecting the desired
function, press either of the
ENT buttons n to
transmit the signal.