Marantz RC1200 - Manual (Page 7)

ENGLISH
A
B
I
J
D
H
G
C
E
F
LCD (Liquid Crystal Display)
Information about currently selected functions
and modes is displayed on the LCD. Pressing
any buttons will call up a full display of
information on the status of that function or
mode. This display will disappear after
approximately 1 minute, except for the
Function Name indicator
A, which is always
displayed.
A
Function Name indicator
Displays the name of the currently selected
function (LD, TV, etc.) using up to 5 characters.
B
Command Name
indicator
Displays up to 10 types of commands for each
function using up to 5 characters.
C
Command Page indicator
Allows confirmation of current command page
o f
J o g D i a l m . A l s o , w h e n s e t t i n g o r
transmitting macros, displays information such
as the number of macro steps and the time
intervals between command transmissions.
D
Transmission indicator
Indicates when the remote controller is
transmitting a signal.
E
USE indicator
Indicates the status in which the programmed
code is output.For normal operation the USE
indicator is displayed.
F
LEARN indicator
Indicates when the remote controller is in the
L E A R N m o d e . I t a l s o a p p e a r s w h e n
programming is cleared.