Function buttons, Volume up / down button, 0 cursor/control buttons – Marantz RC1200 User Manual
Page 5: 1 < • 3 (cursor/ control switching) button, 2 channel up / down button, 3 mute button
ENGLISH
,
Function buttons
Used to switch the remote controller to the
command sets for specific sources (amplifier,
receiver, etc.), thereby allowing a single remote
controller to control up to 11 different
components. To use these buttons to switch the
amplifier’s source, press the desired button
twice within 2 seconds. The
AMP
button , is
used only to switch the command set of the
remote controller itself and therefore does not
transmit any signal. Further, the function
buttons may also be programmed to execute
macros. (A macro allows a complex string of
operations to be performed in series simply by
pressing a single button.) One button can be
programmed to learn sequences containing up
to 10 commands. The following is an example
of a macro sequence:
Turn the receiver ON
→
Switch the function to
DVD
→
Set the Surround Mode to Dolby
Digital
→
Switch the TV to video input
→
Set
the DVD player to Play.
.
VOLUME up / down
button
Used to adjust the volume on receivers and
other components equipped with volume
control.
⁄0
CURSOR/CONTROL buttons
Used to operate on-screen and other displays
used by amplifiers and other components, as
well as to operate the PLAY, STOP, PAUSE,
NEXT, and PREVIOUS functions of each source.
⁄1
< •
3
(CURSOR/ CONTROL
switching) button
Used to switch the function of the CURSOR/
TRANSPORT CONTROL buttons ⁄0 between
CURSOR and TRANSPORT CONTROL, with
the currently selected function displayed on
the LCD when the DVD, LD, or VCR functions
are selected. When functions other than DVD,
LD, or VCR are selected, the
<
•
3 button
remains inactive.
⁄2
Channel up / down
button
Used to controls the up/down function of TV tuner,
or allows one to cycle through the tuner presets.
⁄3
MUTE button
Used to temporarily mute the sound for
preamplifiers, receivers, etc.