Marantz RC1200 - Manual (Page 17)

ENGLISH
ON OFF ON / OFF
SOURCE
MACRO MODE
LEARNING REMOTE
CONTROL RC 1200
POWER
7. Follow the same procedure to enter “D-
A”. When finished, press the
OK Cursor
button ⁄0. Pressing OK permanently fixes
the newly written characters.
Similarly, the function names can be
overwritten by pressing the function buttons.
• Up to 5 characters can be entered in the
function display and command display.
• To rewrite the names of the other items
in the Command Name indicator, use
the
Jog Dial m to select the desired
command and repeat from step 5.
8. When you are finished rewriting, use a
ballpoint pen or other sharp point to press the
MODE button z to return the remote
controller to the USE mode. The USE
indicator is displayed on the LCD, and the
newly programmed codes now can be used.
ERASING PROGRAMMED CODES
(Returning to Factory Presets)
Codes that have been programmed into the
m e m o r y c a n b e e r a s e d i n 4 w a y s : b y
b u t t o n ( s ) , b y f u n c t i o n ( s ) , b y J o g D i a l
c o m m a n d , a n d b y e r a s i n g a l l m e m o r y
contents.
1. Use a ballpoint pen or other sharp point to
press the
MODE button z to switch the
remote controller to the LEARN mode, so
that the
LEARN indicator is blinking on
the LCD.
Note:
Erasing of programmed codes is only
possible in the LEARN mode.