Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 107)

MetroSelect ™
Enable 5 Retries on ACK/NAK
Time Out
Allow up to 5 NAK retransmissions of
the data before dropping out of the
communications loop.
*Disable 5 Retries on ACK/NAK
Time Out
Do not limit retransmission to 5 NAK
c y c l e s .
Support BEL/CAN in ACK/NAK *Ignore BEL/CAN in ACK/NAK
When BEL (07H) is received, the
scanner beeps 3 times and exits the
communications loop. If a CAN (18H) is
received, then the scanner will exit the
communications loop, silently.
I g n o re BEL/CAN characters in
communication loop.
115911 115901
118013 118003
G-10