Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 55)

MetroSelect ™
*1 msec Intercharacter Delay 10 msec Intercharacter Delay
Use these codes to select the amount of delay between sending data characters and “Bar code” Records from the scan-
ner to the host. This helps prevent the scanner from overflowing host input buffers.
Data Transmission Delays
~Variable msec Intercharacter Delay
Scan this bar code and a sequence of code
bytes in Section M to set the delay
between characters sent to the host
system. (Range from 1 to 255 msecs.)
Refer to the MultiCode Method on page iii.
25 msec Intercharacter Delay
Intercharacter Delay Options
818810 8188100
8188250 918800
D-14