Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 54)

MetroSelect ™
Beep on BEL Command
The scanner beeps when it receives
a BEL character from the host. If a
number is sent within 200 msecs
before the BEL character, the
scanner will beep that number of
times.
*Ignore BEL
Command
*Disable Light Pen Toggle During
Beep
Enable Light Pen Toggle During
Beep
When enabled, the scanner beeps and tog-
gles the light pen data line on a successful
decode. This drives a good read indicator.
118417 118407
116913 116903
D-13