Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 59)

MetroSelect ™
*Disable “D/E” Disable
Do not monitor D/E commands.
Enable “D/E” Disable Command
When this option is chosen, the
scanner will disable scanning after it
receives an ASCII “Z” from the host
device. It will enable scanning when it
receives an ASCII “R.”
Enable Z/R Type D/E Simulation *No “Z/R” Type “D/E”
Simulation
Host Scanner Commands
When this option is chosen, the scan-
ner will disable scanning after it
receives an ASCII “D” from the host
device. It will enable scanning when
it receives an ASCII “E.”
Do not monitor Z/R commands.
118115 118105
118211 118201
D-18