Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 23)

MetroSelect ™
There are seven bar code lock lengths available. Specific code types can be assigned to a lock length.
While in programming mode, start with lock length 1, then scan three Code Byte bar codes from
Section M that represent the bar code length. (A table with the code type values can be found in
Section M) Refer to Multi-Code Method on page iii.
This process can be repeated for lock lengths 2 through 7.
~Code Lock #1:
Length
~Code Lock #1:
Code Type
~Code Lock #2: Length ~Code Lock #2: Code Type
Configurable Code Lengths
902000 902100
902200
902300
A-16