Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 83)

MetroSelect ™
~Configurable Suffix
Character #1
~Configurable Suffix
Character #2
~Configurable Suffix
Character #4
~Configurable Suffix
Character #3
User Configurable Suffixes, All Data
When chosen, a suffix ID can be added
and assigned for data transmission.
Use this code with a 3 code byte
sequence from Section M that
represents the desired character.
Assigns a second configurable suffix
c h a r a c t e r.
Assigns a fourth configurable suffix
c h a r a c t e r.
Assigns a third configurable suffix
c h a r a c t e r.
Note: Scan “Enter configuration mode” code before trying to set this feature. Refer to
MultiCode Method on page iii.
E-16
904500 904600
904700 904800