Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 22)

MetroSelect ™
~Symbol Length Lock
This code combined with the proper
Code Bytes, locks the bar c o d e ’s length
into place. Refer to Multi-Code
Method on page iii.
~Minimum Symbol Length
Omnidirectional default is 4. Single-line
default is 3. Combine this code with the
proper Code Bytes, to specify the
minimum number of characters in all
non-UPC/EAN bar codes.
Refer to Multi-Code Method on page iii.
Enable Double Border
Required/Large Intercharacter
Space
*Disable Double Border
Required/Large Intercharacter
Space
Other Decode Features
100011 100001
901800 901900
A-15