Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 5)

MetroSelect ™
Multi-Code Method
1. Power up scanner
2. Scan Enter/Exit Configuration Mode bar code
(3 beeps)
3. Scan bar code for the desired feature
(1 beep)
4. Scan Enter/Exit Configuration Mode bar code
(3 beeps) and save new configuration.
Single Code Method
1. Power up scanner
2. Scan the bar code for the desired feature
3. Observe a “good scan” beep, quickly followed by a multi-toned,
“save setting” beep.
Enter/Exit
Configuration Mode
Bar Code Configuration Methods
999999
iv