Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 76)

MetroSelect ™
E-9
Enable UPC Prefix ID *Disable UPCPrefix ID
When enabled, the scanner will
transmit a prefix before any UPC/EAN
bar code. The prefixes are A (UPC-A),
E0 (UPC-E), F (EAN-13), and
FF (EAN-8). Do not send prefix ID Characters with
UPC/EAN codes.
Enable NCR Prefix ID
When enabled, the scanner will transmit a
prefix before the following code types.
The prefixes are as follows:
A (UPC-A)
E0 (UPC-E)
FF (EAN-8)
F (EAN 13)
B1 (Code 39)
B2 (ITF)
B3 (Code 128 and other codes)
*Disable NCR Prefix ID
116617 116607
107911 107901