Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 49)

MetroSelect ™
Same Symbol Time Out 100
msecs
*Same Symbol Time Out 500 msecs
Same Symbol Time Out 1200 msecs Same Symbol Time Out 2000 msecs
Same Symbol Time Out 200
msecs
No Same Symbol Time Out
These numbers determine the length of time before a bar code can be rescanned after it is removed from the scan field. Single
code fixed settings in msecs of No, 50, 100, 200, 500,1200 (1.2 sec), 2000 (2.0 sec) and infinite are available. Also, user- c o n f i g-
urable value can be set in user-configurable increments of 50 for a range of 50 msecs to 6350 (6.35 sec).
If using the MS9500 series, please go to Section L.
Same Symbol Time outs
818900 818920
818940 8189100
8189240 8189400
D-8