Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 39)

MetroSelect ™
Enable OCIA Output
Select this option if the communications
re q u i rement is an Optically Co u p l e d
In t e rface Adapter (OCIA). This a clocked
(by the host) serial interf a c e .
Load OCIA Defaults
Scan this before selecting Enable
OCIA output
415544
999993
C-2
Select this option for IBM 46XX
SIOC/RS485 communications. Not all
scanners support this interface. The
correct interface board is required.
Enable IBM 46xx Communication
415504
Scan this before selecting
IBM 46XX Defaults
Load IBM 46xx Defaults
999995