Metroselect, Laser/scan modes – Metrologic Instruments Metrologic Scanner MLPN 2407 User Manual
Page 134
Advertising
MetroSelect
™
L-3
*Normal Scan
Continuous Blinky Scan
Custom (One Shot) Scan
Blinky Scan
Laser/Scan Modes
418304
418324
418334
418344
Laser turns on after the IR senses a
bar code. The laser remains on for
approximately 3 to 10 seconds.
Laser turns on after the IR senses a
bar code. The laser will blink on/off
for approximately 60 seconds.
The laser blinks continuously. The IR
is inactive.
Laser turns on after the IR senses a
bar code. The laser will turn off
after a good decode.
Advertising