Metroselect – Metrologic Instruments Metrologic Scanner MLPN 2407 User Manual
Page 82
Advertising
MetroSelect
™
E-15
*Disable Transmit of LRC
Calculation
Will not output an LRC (check
character) after the bar code.
Start LRC on
Second Byte
*Start LRC on
First Byte
Enable Transmit of LRC
Calculation
With this option, the scanner outputs
an LRC check character after the bar
code.
Longitudinal Redundancy Check (LRC)
The scanner will calculate the LRC check
digit starting with the first character
The scanner will calculate the LRC check
digit starting with the second character.
107811
107801
107810
107800
Advertising