IBM INFOPRINT 6500 - Manual (Page 226)

Chapter 8 Configuring iSeries For ASCII Using TCP/IP
226
Figure 27. Example of ADDTCPIFC Interface
The following parameters must be specified:
Internet Address
Internet address of the iSeries LAN adapter.
NOTE: Do not use the IP address of the Ethernet Interface.
Subnet Mask
The Subnet Mask for this iSeries TCP/IP interface (for example,
255.255.255.0).
System: Add TCP/IP Interface
(ADDTCPIFC)
Internet address:
Line description: Name, *LOOPBACK...
Subnet mask:
Associated local interference *NONE
Type of service: *Normal *MINDELAY,
*MAXTHRPUT...
Maximum transmission unit: *Lind 576-16388, *LIND
Autostart: *Yes *Yes, *No
PVC logical channel identifer + for
more values
X.25 idle circuit timeout 60 1-600
X.25 maximum virtual circuits 64 0-64
X.25 DDN interface *NO *YES, *NO
TRLAN bit sequencing *MSB *MSB, *LSB