IBM INFOPRINT 6500 - Manual (Page 376)

376
factory defaults Settings shipped with the Ethernet.
Factory Settings S2 jumper position stating all factory
default settings are to be used while the
Ethernet is up and running.
Firmware Panic Unrecoverable errors detected by the
Ethernet firmware force the Print Server
into Firmware Panic mode. Manually reset
the Ethernet to resume operation.
Flash Stores firmware code and configurable
settings. Allows for upgrades without
replacing hardware inside the Ethernet.
FTP File Transfer Protocol. Used for
transferring files from one TCP/IP host to
another and used in the upgrade process.
gateway A hardware device that translates data
between two incompatible networks.
gateway address The IP address of a gateway.
Hardware Exception Bus errors, address errors, and illegal
instructions force the Ethernet into this
non-operational mode.
HTML HyperText Markup Language. Format
used for documents viewable on the World
Wide Web.
ifnum Interface Number. Represents the network
interface. With an Ethernet, this will always
be “1.”
interface script Unix host filter file that processes the print
job before it is sent over the network to the
Ethernet.
I/O port Port for attaching peripherals to. The
Ethernet provides four: PRN1, PRN2,
COM1, COM2.