IBM INFOPRINT 6500 - Manual (Page 266)

Chapter 10 Overview
266
Configuration Checklist
All of the following configuration steps carried out on z/OS require
appropriate RACF authority.
1. Using the printer operator panel, set up the IPDS printer
emulation to 6408/6412.
2. Set TCP/IP addresses for the printer, such as IP address,
gateway address, or subnet mask. See “Configuration Tools”
on page 52.
3. Configure the host environment.
See “Configuring PSF for z/OS to Print IPDS Files” on
page 267.
4. Verify the configuration. See “Verifying a TCP/IP-Attached
Printer on z/OS” on page 277.
5. If you want to share the printer, do the procedure in “Sharing
IBM 6500-v Printers on z/OS” on page 278.
6. If you have problems, refer to “Handling z/OS Connectivity
Problems” on page 280.