IBM INFOPRINT 6500 - Manual (Page 338)

Chapter 16 Complete Command List
338
store pserver smb workgrp <workgroup>
Example: store pserver smb workgrp eng
Define a different Windows workgroup as defined by
<workgroup> for the Ethernet Interface to be visible within
(should be 14 characters or less). By default, the print server
only comes up within the group called “WORKGROUP.”
store pserver tree [<tree>]
Example: store pserver novell tree tree
Stores the print server object in a specified tree.
ADAPTER,
WIRELESS
ADAPTER
store rprinter add <psname> <printer_num> <dest>
Example: store rprinter add pserver1 0 d1prn
Add the RPRINTER settings on the Ethernet Interface for a
Novell environment. <psname> must be the name of an
existing PSERVER.NLM on your Novell file server.
<printer_num> is the printer number within this
PSERVER.NLM. <dest> is the queue on the Ethernet
Interface where the print jobs will be sent.
ADAPTER,
WIRELESS
ADAPTER
store rprinter del <psname> <printer_num> <dest>
Example: store rprinter add pserver1 0 d1prn
Delete the RPRINTER settings on the Ethernet Interface for a
Novell environment. <psname> must be the name of an
existing PSERVER.NLM on your Novell file server.
<printer_num> is the printer number within this
PSERVER.NLM. <dest> is the queue on the Ethernet
Interface where the print jobs will be sent.
store tcpip <ifnum> addr <address>
Example: store tcpip 1 addr 192.75.11.9
Store the IP address for the Ethernet Interface.
store tcpip <ifnum> frametype [[-]ethernet2]
[[-]802.2snap]
Example: store tcpip 1 frametype ethernet2 802.2snap
Control which frame type(s) is supported with the TCP/IP
protocol. By default, both Ethernet2 and 802.2snap are
enabled, but normal TCP/IP communications rely on Ethernet
2. This setting has no affect on other supported network
protocols (e.g., Novell).