IBM INFOPRINT 6500 - Manual (Page 332)

Chapter 16 Complete Command List
332
WIRELESS
ADAPTER,
WIRELESS
Set the default key for WLAN encryption:
store ifc <ifnum> wlan defkey disable|<1-4>
<ifnum> is the interface number for the WLAN device.
<1-4> is the number identifying one of the four keys (1-4). A
value of zero or the word “disable” disables encryption.
WIRELESS
ADAPTER,
WIRELESS
Set the key to a given value:
store ifc <ifnum> wlan key <key-num> <key-value>|
<$<string-key>{<length>]>
<ifnum> is the interface number for the WLAN interface.
<key-num> is the number identifying one of the four keys (1-4).
<key-value> is the encryption key value for <key-num>. The
value must consist of 5 or 13 double- or quad-digit HEX
numbers, separated by colon (':') or dash ('-') characters for
readability (e.g. D1C2-B3A4-9586-7768-594A-3B2C-1D).
Alpha characters are NOT case sensitive. All zero disables
encryption for <key-num>. If '$' is the first character the
remainder of the argument is treated as a literal string with all
alpha-numeric characters allowed except spaces). Key length
is inferred from the length of
key-value so leading zeroes of
longer keys must be entered (not blanked).
WIRELESS
ADAPTER,
WIRELESS
Enables or disables Kerberos:
store kerberos opts [-]auth
Sets the maximum allowable amount of clock skew in seconds
or minutes that Kerberos authentication will tolerate before
assuming that a Kerberos message is invalid:
store kerberos config clockskew <clock_skew><s|m>
The time units cannot be mixed and there must at least be one
space between the <renew_life_time> value and the time unit
(s or m). The default is 300 seconds, (i.e. five minutes). The
minimum allowable value is 60 seconds (i.e. 1 minute). The
maximum allowable value is 900 seconds (i.e. 15 minutes).