Configuring an interface for ethernet – IBM INFOPRINT 6500 User Manual
Page 244
Chapter 9
Configuring On iSeries As An IPDS Printer
244
Configuring An Interface For Ethernet
ADDTCPIFC
is used to add a TCP/IP interface to iSeries. This step
configures the iSeries for attachments to a TCP/IP network.
1.
At the iSeries command line, enter the following command:
ADDTCPIFC INTNETADR ('9.99.15.188') LIND(ETHLAN)
SUBNETMASK('255.255.255.0')
2.
Your completed screen should look like Figure 30.
Figure 30. Example ADDTCPIFC Interface
System: ADDTCPIFC
Internet address:
Line description
Subnet mask:
Associated local interface
*NONE
Type of service
*NORMAL
Maximum transmission unit:
*LIND
Autostart:
*YES
PVC logical channel identifier
+ for more values
X.25 idle circuit timeout
60
X.25 maximum virtual circuits
64
X.25 DDN interface
*NO
TRLAN bit sequencing
*MSB