IBM INFOPRINT 6500 - Manual (Page 353)

Set Commands
353
set sysinfo email emailname@domain
Example: set sysinfo email [email protected]
Define the user email address to receive printer and job logging
information from a particular logpath on the Ethernet Interface.
E-mail name is the host or IP name of the user.
Default: Unconfigured.
set sysinfo label|name [<string>]
Example: set sysinfo name salesprinter
Set a descriptive name defined by <string> for Ethernet
Interface identification purposes. This is not used in the
operation of the print server in any way.
set sysinfo location [<string>]
Example: set sysinfo location salesdept
Set the physical location of the Ethernet Interface. This is for
identification purposes and is not used in the operation of the
print server in any way.
set sysinfo loginfo [-]sys | [-]tcp | [-]ipx | [-]spx
Example: set sysinfo loginfo -sys ipx
Set the Ethernet Interface debugging information type. Usually
this information includes unexpected errors or exceptions from
the print server divided into these groups:
sys General system messages
tcp TCP stack messages
ipx IPX stack messages
spx SPX stack messages
NOTE: This is not printer or job logging information.
set sysinfo logport null|prn|syslog
Example: set sysinfo logport null
Define to where the debugging information should be sent. This
can be sent to an output device off of the Ethernet Interface I/O
port or to a central TCP/IP host running a SYSLOG daemon.
To set TCP/IP host, use the command
set sysinfo
syslog hostIPaddress .