IBM INFOPRINT 6500 - Manual (Page 261)

Printer Sharing Parameters
261
Printer Sharing Parameters
To set up iSeries for printer sharing, set the following parameters.
Table 11. Printer Sharing
iSeries
Version
Where Set Parameter
Recommended
Value
Description
V3R7
V4R1 CRTPSFCFG
CHGPSFCFG ACTRLSTMR *NORDYF Specifies the point at
which the release timer
(RLSTMR) is activated.
Set to *NORDYF. This
means that the release
timer is activated when
there are no spooled
files in the printer’s
output queue with a
status of RDY and the
last page of the last
spooled file processed
has printed. *NORDYF
is used so that all files
with a status of RDY are
printed before releasing
the session (which does
not terminate the
writer).
V3R7
V4R1 CRTPSFCFG
CHGPSFCFG RLSTMR *SEC15 Specifies the amount of
time to wait before a
session or dialog is
released without
terminating the writer.
The ACTRLSTMR
parameter specifies
when this timer is to be
activated. Set the
parameter to a value at
least equal to the
TIMEOUT value on the
printer. The
recommended value is
*SEC15.