Intel SGI Altix 450 - Manual (Page 105)

Ethernet Switch
007-4857-002 83
The front panel display contains the following items:
• 2 x 12 character liquid crystal display (LCD). The display identifies the IRU, shows system
status, warns of required service, and identifies a failed component.
• Power (On/Off) button (insert paper clip to actuate) and power on LED.
• Service required LED.
• Failure LED.
• Reset switch (insert paper clip to actuate).
• Non-maskable interrupt (NMI) switch (insert paper clip to actuate).
Note: The reset and NMI switch functions on any IRU in a NUMAlink connected system
will affect all the IRUs in the system.
Ethernet Switch
Use of an Ethernet switch is the preferred method of interconnecting large systems with multiple
L2s and remote support hardware to multiple systems. An optional Ethernet switch provides
multiple additional Ethernet connectors. Figure 4-3 shows sample connections between an
Ethernet switch, a remote workstation, an IRU, and other SGI systems.
Figure 4-3 Ethernet Switch System Controller Block Diagram (Example)
Ethernet
switch
To Ethernet connectors
on other systems
To IRU To optional
remote workstation