Intel SGI Altix 450 - Manual (Page 86)

64 007-4857-002
2: Operation Procedures
B___T___L Type Vendor Product Rev Disk Blocks Disk MB
1. 0 0 0 Disk SGI ST3146854SS X422 286749488 140014
2. 0 1 0 Disk SGI ST3146854SS X422 286749488 140014
To create a volume, select two or more of the available targets
Select a target: [1-2 or RETURN to quit] 1
Select a target: [1-2 or RETURN to quit] 2
2 physical disks were created
Select volume type: [0=Mirroring, 1=Striping, default is 0]
Select volume size: [1 to 139898 MB, default is 139898]
Enable write caching: [Yes or No, default is No]
Zero the first and last blocks of the volume? [Yes or No, default is No]
Volume was created
RAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 1
1 volume is active, 2 physical disks are active
Volume 0 is Bus 0 Target 0, Type IM (Integrated Mirroring)
Volume State: degraded, enabled , resync in progress
Volume Settings: write caching disabled , auto configure
Volume Size 139898 MB, Stripe Size 0 KB, 2 Members
Primary is PhysDisk 0 (Bus 0 Target 56)
Secondary is PhysDisk 1 (Bus 0 Target 1)
RAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 99
Resetting port...
RAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 0
Main menu, select an option: [1-99 or e/p/w or 0 to quit] 0
Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC
1. 01/00/01/0 LSI Logic SAS1068 B0 105 01100000 0
Select a device: [1-1 or 0 to quit] 0
Sas(Pun0,Lun0) LSILOGICLogical Volume 3000