Intel SGI Altix 450 - Manual (Page 85)

Installing Optional Components
007-4857-002 63
1. Identify firmware, BIOS, and/or FCode
2. Download firmware (update the FLASH)
4. Download/erase BIOS and/or FCode (update the FLASH)
8. Scan for devices
10. Change IOC settings (interrupt coalescing)
13. Change SAS IO Unit settings
16. Display attached devices
18. Change WWID
20. Diagnostics
21. RAID actions
22. Reset bus
23. Reset target
24. Clear ACA
39. Force firmware download boot
45. Concatenate SAS firmware and NVDATA files
60. Show non-default settings
61. Restore default settings
97. Reset SAS phy
98. Reset SAS link
99. Reset port
e Enable expert mode in menus
p Enable paged mode in menus
w Enable logging
Main menu, select an option: [1-99 or e/p/w or 0 to quit] 21
1. Show volumes
2. Show physical disks
3. Get volume state
23. Replace physical disk
30. Create volume
31. Delete volume
32. Change volume settings
50. Create hot spare
99. Reset port
e Enable expert mode in menus
p Enable paged mode in menus
w Enable logging
RAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 1
0 volumes are active, 0 physical disks are active
RAID actions menu, select an option: [1-99 or e/p/w or 0 to quit] 30