Intel SGI Altix 450 - Manual (Page 37)

Installing a Rack
007-4857-002 15
Transporting the Shipping Crate
Use a pallet jack with forks that are 48 in. (122 cm) long or longer to transport the shipping crate
to the designated location. See Figure 1-3 and Figure 1-4 for the crate dimensions and location to
position the pallet jack.
If the crate does not fit through all access doors, you may need to partially disassemble the crate.
Caution: If the system shipping or storage environment is significantly colder than the
environment in which it will be installed [40
º F (22 º C) or greater disparity], leave the rack in its
shipping crate for at least 24 hours at room temperature before you start the installation. This
acclimation prevents damage to the equipment that could result from thermal shock and
condensation.
!