Figure 1-14, Ors. figure 1-14 show – Intel SGI Altix 450 User Manual
Page 52
Advertising
30
007-4857-002
1: System Installation
Figure 1-14
NUMAlink Cabling an IRU to an Additional IRU
To connect two Altix 450 compute modules to each other with NUMAlink cables, follow these
steps:
1.
Power off both compute modules (see “Powering the System On and Off” on page 38).
2.
Connect the NUMAlink cables to the NUMAlink connectors on both IRU modules.
3.
Connect a system console to the master IRU (the one with the system disk), as described in
“Connecting the System Console” on page 36.
4.
Power on both IRUs as described in “Powering the System On and Off” on page 38.
COMP
A
C
T
COMP
A
C
T
inside
TM
inside
TM
Advertising