Intel OPEN (660) 120/140/150 II - Manual (Page 104)

User Manual version 2.1
OPEN (660) 120/140/150
7-94
7.4.5. Power Management Setup
If the POWER MANAGEMENT SETUP option is selected
from the main menu, the screen below will appear. The
following sample screen consists of the default values for
OPEN (660).
ROM PCI/ISA BIOS (2A69KHE9)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management: Disable
PM Control by APM: Yes
Video Off Method : V/H SYNC+Blank
Video Off After
: Standby
MODEM Use IRQ : 3
Doze Mode: : Disable
Standby Mode : Disable
Suspend Mode: : Disable
HDD Power Down : Disable
Throttle Duty Cycle : 62.5%
PCI/VGA Active Monitor : Disabled
Soft-Off by PWR-BTTN : Instant-Off
Rower on by Ring
: Disabled
IRQ 8 Break Suspend : Disabled
** Reload Global Timer Events **
IRQ(3-7, 9-15) NMI
: Disabled
Primary IDE 0 : Disabled
Primary IDE 1 : Disabled
Secondary IDE 0 : Disabled
Secondary IDE 1 : Disabled
Floppy Disk : Disabled
Serial Port : Enabled
Parallel Port : Disabled
ESC: Quit ↑↓→← : Select Item
F1 : Help PU/PD/+/-: Modify
F5 : Old Values (Shift )F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults