Intel OPEN (660) 120/140/150 II - Manual (Page 134)

User Manual version 2.1
OPEN (660) 120/140/150
9-124
When Recalibration is Necessary
Once calibrated, the touchscreen will be ready to run
automatically each time the system is restarted.
Recalibration should only be necessary after moving or
resizing the video image, or after changing either the
touchscreen, controller, or monitor.
Type "DEMOCAL" or click on “Calibrate” in the Windows
Touchscreen Control Panel to re-run the calibration
sequence.
U
NINSTALLING THE
S
OFTWARE
Demonstration Program
You may wish to delete the demonstration program from
your hard disk after you have run it. This will free
approximately 1.7 Mbytes of disk space. Delete
EloDEMO.EXE, *PIC,*.IMG, and *.BGI, typically found in
the \TOUCH directory.
MonitorMouse for Windows
Delete CURSOFF.EXE and Elo.BMP from the \WINDOWS
directory. Delete MONMOUSE.DRV, VMMD.386,
EloCALW.*, and OEMElo.INF from \WINDOWS\SYSTEM.
Delete the lines indicated by comments as added by Elo
from your SYSTEM.INI file. Delete the [EloCalW] section
from WIN.INI. Run Winodws Setup and re-select your
mouse.
All Elo Software
Delete the Elo directory (typically \TOUCH) and then
follow the above instructions to delete MonitorMouse for
Windows if necessary. Remove any lines for EloDEV,
MONMOUSE, NOMOUSE, and TCHBACK from
AUTOEXEC.BAT as necessary.