Intel OPEN (660) 120/140/150 II - Manual (Page 131)

User Manual version 2.1
OPEN (660) 120/140/150
9-121
To install the software, insert the DOS and Windows
Driver Disk and type:
A:INSTALL <Enter>
or
B:INSTALL <Enter>
Respond to the on-screen prompts and instructions. You
will be asked to specify the model and configuration of
your controller, then select between DOS Express
Installation, Windows Express Installation, or
Selective Installation. The touchscreen controller
of the OPEN (660) 120/140/150 I is serial type.
The model number is E271-2210 AccuTouch. Baud
rate of the controller is “9600”. The OPEN (660)
120/140/150 I uses onboard COM3 to drive this
controller, IRQ is selected by BIOS setting. IRQ10
is the factory default setting for COM3. The software
to be installed and disk space requirements will be
displayed for each installation option. You may specify
the drive and directory for the files you choose to install,
or use the default (C:\TOUCH).
The INSTALL program will modify your AUTOEXEC.BAT
file, (and SYSTEM.INI file for Windows installations).
Copies of the original files will be saved as
AUTOEXEC.OLD and SYSTEM.OLD.
Command Line Flags
Several flags may be specified on the INSTALL command
line.
To override the default system language used by INSTALL,
specify the -L flag as follows:
INSTALL -L <x>
Use -Lg or -Ld for German, -Ls for Spanish, -Lf for French,
or -Le for English.
To override the path to C:\AUTOEXEC.BAT, use the -a flag
as follows:
INSTALL -a <filename with path>