Intel OPEN (660) 120/140/150 II - Manual (Page 128)

User Manual version 2.1
OPEN (660) 120/140/150
9-118
9.2. Elo Touchscreen Driver Installation
The Elo resistive touch and Intelli touch will use the same
drivers and utilities which are stored in either the CD
diskette or floppy disk drive.
9.2.1. System Requirements
The DOS drivers will run on any system with DOS 2.0 or
later version. The Windows drivers will run on any
system with Windows 3.1 or later versions. The DOS
demonstration program requires a VGA color display.
The touchscreen calibration program for DOS supports
standard and VESA-compatible display modes.
Otherwise, all software is video independent. An Elo
touchscreen must be installed on the display and
connected to a serial or bus controller.