Intel OPEN (660) 120/140/150 II - Manual (Page 139)

User Manual version 2.1
OPEN (660) 120/140/150
9-129
9.2.5. Installing MonitorMouse for Win NT
1. Start your computer.
2. Insert the MonitorMouse for Windows NT disk into
drive A.
3. Click the Start button, and then click Run.
4. Type "a:\setup" in the space provided and press
<Enter>.
5. Follow the directions on the screen.
6. The Touchscreen Setup Wizard will appear. You will
need to specify the touchscreen controller on COM3
(IRQ 10). Also specify the language you want to
use in the Touchscreen Control Panel.
7. Complete the Setup program.
8. Shutdown and restart Windows NT.
9. Click the Start button, then click Settings, and then
click Control Panel.
10. Double-click Elo Touchscreen to run the Touchscreen
Control Panel.
11. Click the Calibrate button and touch each of the three
targets as they appear on the screen. Touch Yes when
the cursor lines up correctly with your finger. Touch
OK to close the Touchscreen Control Panel.