Intel OPEN (660) 120/140/150 II - Manual (Page 126)

User Manual version 2.1
OPEN (660) 120/140/150
9-116
9.1.5. Calibrate the MicroTouch Touchscreen
After the touchscreen and TouchWare are installed, you
must calibrate the touchscreen.
Calibration serve two purposes:
² Sets the active area of the touchscreen
² Aligns the touchscreen’s active area to the
underlying video
To calibrate the touchscreen, use the Calibrate option on
the Touchscreen control panel and follow the directions
displayed on the screen. For more information, please
refer to the online help or MicroTouch website.
Note: Before calibrating the touchscreen, let the
display warm up for several minutes and then
center the video image within the screen area.
Also, always calibrate the touchscreen at the
display video resolution that you touch
application will use.