Intel OPEN (660) 120/140/150 II - Manual (Page 135)

User Manual version 2.1
OPEN (660) 120/140/150
9-125
9.2.4. Installing MonitorMouse for Win 95
1. Turn on your computer.
2. Insert the MonitorMouse for Windows 95 disk into
drive A.
3. Click the Start button, and then click Run.
4. Type "a:\setup" in the space provided and press
<Enter>.
5. Follow the instructions on the screen.
6. The Touchscreen Setup Wizard will appear. You will
need to specify the type of touchscreen controller
you are using and how it is connected.
Control type: serial
SmartSet:
2xx0
COM port: COM1
7. Complete the Setup program.
8. Restart Windows 95.
9. Run the Windows 95 Registry Editor by clicking the
Start button. Click Run, then type “regedit” and
press <Enter>
10. Edit the value of the following registry keys in the
following registry key folder to match the number,
I/O port Address, and IRQ of the COM port to which
the touchscreen is connected:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Ser
vices\VxD\MonMouse\
TouchScreen00
\ComPort
(the COM port number)
COM 3:
03 00
\ControllerAddress E8 03
\ControllerIRQ (hexadecimal)
IRQ 10: 0A 00