Stability - all models, Anti-tippers – Invacare 9000 XT User Manual

Page 10

Advertising
background image

9000 Series

10

Part No. 1056953

SECTION 1

GENERAL GUIDELINES

GENERAL

GUIDELINES

STABILITY - ALL MODELS

WARNING

The seat depth, back height/angle, seat angle, size/position of the front

casters, size/position of the rear wheels, anti-tipper model, as well as the

user condition directly relate to the stability of the wheelchair. Any

change to one (1) or any combination of the ten (10) may cause the

wheelcahir to decrease in stability. These adjustments MUST be per-

formed by a qualified technician.

Seat

Depth

Back Height

Back Angle

Seat Angle

Caster Size

Caster

Position

Wheel Size

Wheel

Position

Anti-Tippers (front and rear)

User

Condition

Seat Depth

•

N/A N/A N/A

ь

ь

N/A N/A

ь

ь

Back Height

N/A

•

N/A N/A N/A N/A N/A N/A

N/A

ü

Back Angle

N/A N/A

•

N/A N/A N/A N/A

ь

ь

ь

Seat Angle

N/A N/A N/A

•

ь

ь ь

ь

ь

ь

Caster Size

N/A N/A N/A

ь

•

ь ь

ь

ь

ь

Caster Position

N/A N/A N/A

ь ь

•

ь

ь

ь

ь

Wheel Size

N/A N/A N/A

ь ь

ь

•

ь

ь

ь

Wheel Position

N/A N/A N/A

ь ь

ь ь

•

ь

ь

User Condition

ь

ь

ь

ь ь

ь ь

ь

ь

•

NOTE: When changes to the left hand column occur, follow across the chart and refer to the

ü procedure to maintain the proper stability, safety and handling of the wheelchair.

The various seat-to-floor heights require specific settings depending on

rear wheel size, rear wheel position, front caster size/position and desired

seat-to-floor angle. These adjustments MUST be performed by a qualified

technician.

ANTI-TIPPERS

Anti-tippers are specific to the different seat-to-floor angles and/or seat-to-

floor heights. Refer to the chart in INSTALLING/ADJUSTING THE ANTI-

TIPPERS in SECTION 8 of this manual for correct usage and adjustment. If

these requirements CANNOT be achieved, DO NOT use the wheelchair.

Contact a qualified technician. If changing the seat-to-floor height with or

without a change to seat-to-floor angle, the correct anti-tippers MUST be

used to maintain a 1-1/2 to 2-inch ground clearance.
Seat-to-floor angle of 0° or 3°: If so equipped, anti-tippers MUST be at-

tached at all times. Inasmuch as the anti-tippers are an option for 0° or 3°

on this wheelchair (you may order with or without the anti-tippers),

Invacare strongly recommends ordering the anti-tippers as a safeguard

for the wheelchair user.

Advertising
This manual is related to the following products: